G&D DP-Vision-CAT Series, Инструкция по установке и эксплуатации

Страница: 97 / 168

Installation
10 · G&D DP-Vision-CAT
Connecting an additional interface of the UC variants
Transmission 2: Plug a category 5e (or better) twisted pair cable, which is available as
accessory, into this interface. Connect the other end of the cable to the respective
interface of a compatible computer module or matrix switch.
Optional: Connecting a local console
Keyb./Mouse: Connect the mouse and/or the keyboard of the local console to this
interface.
DisplayPort Out: Connect the monitor of the local console to this interface.
NOTE:
With the also available UC versions of the computer modules, you can con-
nect a computer to two compatible digital extenders.
Alternatively, you can connect a compatible matrix switch to each of the two
channels instead of a digital extender.
NOTE:
The keyboard of the local console can either be a PS/2 or a USB device.
ADVICE: Use the adapter MD6M-2xMD6F (A6400043) to use a PS/2 keyboard and a
USB mouse at the same time.
NOTE: One DisplayPort Out interface is available for every video channel of m ulti-chan-
nel variants. The number behind the name of the interface assign each interface to
a particular channel.
RS232
Main P
ower
Keyb. CPU Mouse USB CPU
Red. Power
Transmission 1
Keyb./Mouse In Out Line
CPU
DisplayPort 1
Out
Transmission 2
Main P
ower
RS232
Keyb. CPU Mouse USB CPU
USB 2.0 CPU
In Out Line
Red. Power
Transmission
USB 2.0 Trans.
Keyb./Mouse
CPU DisplayPort 1 Out