G&D DP-HR-U, Установка и эксплуатация

Страница: 165 / 196

User module »DP-HR-U-CON-Fiber-DH«
Target and user modules (DP-HR-U) · 160
LED Out:
If you purchased and added the
TradeSwitch feature
to the matrix switch,
connect the optional
TS-LED
2 here (order number A6100041).
Connection to the matrix switch
Transmission|Tx: Insert the LC plug of a compatible optical fibre cable. Connect the
other end of the cable to the Rx interface of a Dynamic Port provided at the matrix
switch.
Transmission|Rx: Insert the LC plug of a compatible optical fibre cable. Connect the
other end of the cable to the Tx interface of the same Dynamic Port provided at the
matrix switch.
IMPORTANT: The devices use components with laser technology which comply
with laser class 1.
They meet the requirements in accordance to EN 60825-1:2014 as well as
U.S. CFR 1040.10 and 1040.11 .
Mind the following instructions when dealing with laser beams:
 Avoid direct eye exposure to beam on page 3
 Always connect optical connections or cover them with protection caps on page 3
 Only use G&D certified transmission modules on page 3
NOTE: Use optical fibres with LC plugs to connect the devices. The cables are
available as accessories.
ADVICE: You can also connect the user module directly to a compatible target
module.
Micro In Speaker Keyb./Mouse
Generic
Main P
ower
Red. Power
LED Out Mouse
Keyb.
DisplayPort
Out 1 Out 2
USB Devices
Transmission