G&D DP-HR-U, Установка и эксплуатация

Страница: 35 / 196

Target module »DP-HR-U-CPU-Fiber«
Target and user modules (DP-HR-U) · 30
Connection to the matrix switch
Trans.|Tx: Insert the LC plug of a compatible optical fibre cable. Connect the other
end of the cable to the Rx interface of a Dynamic Port provided at the matrix switch.
Trans.|Rx: Insert the LC plug of a compatible optical fibre cable. Connect the other
end of the cable to the Tx interface of the same Dynamic Port provided at the matrix
switch.
Power supply
Power In: Connect the cable of the power pack to this interface. Now connect the
power cable to the power pack and a power socket.
IMPORTANT: The devices use components with laser technology which comply
with laser class 1.
They meet the requirements in accordance to
EN 60825-1:2014
as well as
U.S. CFR 1040.10
and
1040.11
.
Mind the following instructions when dealing with laser beams:
 Avoid direct eye exposure to beam
on page 3
 Always connect optical connections or cover them with protection caps
on page 3
 Only use G&D certified transmission modules
on page 3
NOTE: Use optical fibres with LC plugs to connect the devices. The cables are
available as accessories.
ADVICE: You can also connect the target module directly to a compatible user module.
Power In
Service
Power
Trans.