G&D DL-DVI-Vision-IP Series, Инструкция по установке и эксплуатации

Страница: 126 / 228

Installation
G&D DL-DVI-Vision-IP · 7
English
Installing the computer module
Install a compatible computer module of the
Vision-IP
or
VisionXS-IP
series as
described in the manual of the computer module.
Installing the console module
The remote console is connected to the
DL-DVI-Vision-IP-CON
console module. The
computer connected to the computer module can be operated from this console.
Establishing a connection to a local management network
Network Management:
Insert a category 5 twisted pair cable (or better), which is availa-
ble as accessory. Connect the other end of the cable to the local network.
Connecting keyboard and mouse of consoles and other devices
Keyb./Mouse: Connect the mouse and/or the keyboard of the console to this interface.
Generic: In the default settings, you can use this interface to connect another USB
input device, a supported display or tablet, or a USB mass storage device.
NOTE: If desired, connect this network interface to a local network. This enables
you to access the
Config Panel
web application from this network and to send sys-
log messages to this network.
NOTE:
Both the keyboard and the mouse of the console can either be PS/2 or USB
devices.