G&D DL-DVI-Vision-IP Series, Инструкция по установке и эксплуатации

Страница: 141 / 228

Establishing a KVM-over-IP™ connection for the first time
22 · G&D DL-DVI-Vision-IP
IP-MUX functionality
The modules of the DL-DVI-Vision-IP series offer with the IP-MUX functionality the pos-
sibility to access different computer modules (one after the other).
To use this function, you can connect a maximum of 20 computers to separate com-
puter modules and configure these computer modules as remote targets (see
page 22 ff.) in the console module.
The configured remote targets can be connected via the local OSD of the console module.
Add, configuration and deletion of a remote target
How to add a new remote target:
1. Use the local hotkey Alt + Num to open the OSD of the console module.
2. Press F11 to open the Configuration menu.
3. Select the entry KVM connection and press Enter .
4. Select the entry RemoteTarget and press Enter .
5. Press the F3 key to create a new remote target.
6. Enter the following data:
7. Press F2 to save your settings.
IMPORTANT: A console module can only be connected to one computer module at
a time!
Name:
Enter the name of the G&D remote station to be
displayed in the Select menu.
Hostname: Enter the IP address/host name of the
G&D remote station.
NOTE:
In the Hostname field, you can use the key combination Ctrl+F8 to open
the Detected devices dialog. This dialog shows you all unpaired remote stations
(computer modules and matrix switches).
Select the desired remote station and press
Enter to apply the IP address of the
remote station.