G&D DL-DVI-Vision-IP Series, Инструкция по установке и эксплуатации

Страница: 183 / 228

Configuration
64 · G&D DL-DVI-Vision-IP
Configuration settings
Operating modes of console modules
Depending on the application of the KVM extender, you can select one of the fol-
lowing operating modes:

OpenAccess mode: In this mode, access to the KVM extender is not protected by
authentication.
You can configure the same access rights for both a KVM extender and a user
account.

Standard mode: The default mode allows access to the KVM extender only after
users are authenticated with their username, password, and 2-factor authentication
if set up.
User rights can be configured in the individual user account.
How to select the operating mode of the KVM extender:
NOTE: This operating mode is set by default .
IMPORTANT:
The configured access rights apply to all users working with this
KVM extender.
NOTE:
This operating mode is set by default , if you use the extender as a matrix
switch module (see Use as extender or matrix switch module on page 4).
OSD
1. Press Ctrl+Num ( default ) to open the OSD.
2. Select the row Console setup and press Enter .
3. Under Console type , select one of the following options:
OpenAccess  OpenAccess mode ( default )
Standard  Standard mode
4. Press F2 to save your settings.