Figure 29. Data and stop bits
6.7.
Ethernet parameters menu (Ethnt)
Figure 30. Ethernet parameter menu
DHCP & IP address (Addr)
The SPCe is capable of acting as a DHCP (Dynamic Host Configuration
Protocol) client. When enabled as a DHCP client, the SPCe will obtain needed
network information from a DHCP server. When DHCP is disabled, the user
may change the SPCe Ethernet address. Currently IPv4 is the only supported
format.
Figure 31. DHCP and IP address
Subnet mask(Mask)
When DHCP is disabled, the user may change the Ethernet subnet mask.
Figure 32. Subnet mask
04/2021 - ©Gamma
Page 26
900026_F
900026_F - Display menu
