Gamewell FLEXALARM 620, Руководство по установке и эксплуатации

Страница: 78 / 108

Programming Signal Circuit Special Functions
Silence Inhibit
The Signal Silence Inhibit feature will prevent
ALL of the systems signal circuits
from being silenced for a period of 1 minute (Default, programmable) after an initial
alarm is received. This is a system wide feature and cannot be selected on a per circuit
basis.
While in the programming mode select the Silence Inhibit key. It’s associated LED
will illuminate. To deselect this option press the Silence Inhibit key again (LED off).
____________________________________________________________________________________________
Auto Silence
The Automatic Signal Silence feature will automatically silence any signal circuits
selected for this option after a period of 10 minutes (default).
1. From the programming mode select the Auto Silence option and press the
“ENTER” key.
2. Select all of the Signal Circuits that should automatically silence by pressing their
associated circuit key.
3. After all of the circuits are selected (circuit LED’s “ON”) press the “ENTER”
key.
4. If additional changes are required, repeat this procedure.
____________________________________________________________________________________________
Drillable
The Drillable feature determines if the Signal Circuits will activate when the drill
feature is selected.
1. From the programming mode select the Drillable option and press the “ENTER”
key.
2. Select all of the Signal Circuits that should activate when the Drill switch is
pressed by pressing their associated circuit key.
3. After all of the circuits are selected (circuit LED’s “ON”) press the “ENTER”
key.
4. If additional changes are required, repeat this procedure.
Technical Manuals Online! - http://www.tech-man.com