Gamewell FLEXALARM 620, Руководство по установке и эксплуатации

Страница: 72 / 108

Access Levels
Û Note : System configuration (i.e. SmartStart

) defaults to level 2
password access. When the password access level is changed, the
system defaults to that level (except programming) including after
power failure occurs.
Access Levels :
The system has four levels of access. The levels are defined as follows:
Primary - LEVEL 1:
User has access only to the [ACK] acknowledge function. The default password for
level 1 is 1111.
Operating - LEVEL 2:
User has access to all Level 1 functions plus the [Reset], [Signal Silence] and [Drill]
functions. The default password for level 2 is 2222.
Maintenance -
LEVEL 3:
User has access to all Level 1 and Level 2 functions plus the [Bypass] and [WalkTest]
functions. The default password for level 3 is 3333.
Service - LEVEL 4:
Access to programming. Programming can only be completed using the level 4
password entry. Default password for level 4 is 4444. When this mode is entered the
key switches are redefined. Reversing the front display strips will reveal the
programming display functions. After a period of approximately 10 minutes of no Key
action is detected, the system will automatically come out of programming mode and
return to the last access level used.
____________________________________________________________________________________________
Figure 4.1 Common Control Display - Operating Mode
Password Entry
POWER ON
BATTERY FAULT
ACKNOWLEDGE
RESET
SIGNAL
SILENCE
COMMON ALARM
PRE-ALARM
FIRE
SUPERVISORY
SECURITY
TROUBLE
TRBL. SILENCED
PASSWORD REQD.
ENTER
PASSWORD ACCEPT
ANNUN. FAULT
WALKTEST
BYPASS/
ENABLE
EARTH FAULT
DRILL
TROUBLE
COMMON TRBL.
ALARM
ALARM
ALARM
TROUBLE
TROUBLE
CITY TIE
SIG CKT
SIG CKT
1
2
3
4
5
6
7
8
Technical Manuals Online! - http://www.tech-man.com