Gambro WRO 300, Руководство оператора

Страница: 48 / 68

WRO 300 H
48 Technical data
HCEN12104 Rev 09.2010
RF emissions
CISPR 11 Class B The WRO 300 H is suitable for use in all establish-
ments, including domestic establishments and those
directly connected to the public low-voltage power
supply network that supplies buildings used for
domestic purposes
Harmonic
emissions IEC
61000-3-2 Class A (Not
applicable for
115 V version)
Voltage fluctu-
ations/flicker
emissions IEC
61000-3-3 Complies (Not
applicable for
115 V version)
Immunity test
IEC 60601
test level Compliance
level Electromagnetic environment-
guidance
Electrostatic
discharge
(ESD)IEC
61000-4-2 ±6 kV contact
±8 kV Air ±6 kV contact
±8 kV Air Floors should be wood, concrete
or ceramic tile. If floors are covered
with synthetic material, the relative
humidity should be at least 30%.
Surge IEC
61000-4-5 ±1 kV for dif-
ferential mode
±2 kV for com-
mon mode 1 kV for differ-
ential mode
± 2kV for com-
mon mode Mains power quality should be that
of a typical commercial or hospital
environment
Voltage dips,
short interrup-
tions and volt-
age variations
on power sup-
ply input lines.
IEC 61000-4-
11 <5% U
T
a
(>95% dip in
U
T
) for 0.5
cycle
<5% U
T
(>95%
dip in U
T
) for
0.5 cycle
Mains power quality should be that
of a typical commercial or hospital
environment.
40% U
T
(60%
dip in U
T
) for 5
cycles
40% U
T
(60%
dip in U
T
) for 5
cycles
70% U
T
(30%
dip in U
T
) for
25 cycles
70% U
T
(30%
dip in U
T
) for
25 cycles
<5% U
T
(>95%
dip in U
T
) for 5
sec
<5% U
T
(>95%
dip in U
T
) for 5
sec
Value