![background image](http://html1.mh-extra.com/html/gama/easy-spray-h/easy-spray-h_service-manual_3308459011.webp)
Easy Spray-H
Service Manual
11/48
Issue 1.9
Ref. NR-00088-ENG
http://www.gamapur.com/
Figure 2
.
Control panel
The control panel enables you to set the optimum operating conditions for the characteristics
and requirements of the products dispensed. Press the MODE button to enter the desired
settings for temperature, intensity and number of cycles to run. The selected parameter remains
flashing for a few seconds, allowing you to change the values by touching the UP / DOWN
buttons. After changing the value, press the MODE button again to confirm your selection.
The parameter modification function automatically cancels after a few seconds if there is no
further activity on the buttons.
The parameters that can be selected and viewed are:
Hose temperature in automatic control mode (maximum 80ºC)
Hose heating intensity in manual control mode (maximum 5.0 amps)
Isocyanate heater temperature (maximum 90ºC)
Polyol heater temperature (maximum 90ºC)
Number of cycles to run.
Number of cycles completed.
CONTROL PANEL