Easy Spray-H
Service Manual
33/48
Issue 1.9
Ref. NR-00088-ENG
http://www.gamapur.com/
The
Easy Spray-H
unit has been designed and built to operate in severe working conditions. It
will work with a high degree of reliability on condition that it is used and maintained correctly.
This section contains information on the possible causes of malfunctions in the unit. Most
problems with the unit can be detected and resolved using the information provided in this
section. Please refer to this information before requesting technical assistance from your
authorized dealer or HI-TECH technical services. Feel free to contact the technical assistance
service of HI-TECH SPRAY EQUIPMENT, S.A. at any time. Our team of qualified technicians is
on hand to help and advise you when necessary.
NOTE:
Repairs by unqualified personnel or the use of non-original replacement parts
can damage the unit and endanger the safety of the operator.
To avoid bodily damage caused by the incorrect handling of the
substances and solvents used in the spraying process, read carefully the
safety information provided by suppliers.
Dispose of waste as required by applicable legislation.
Disconnect the unit from the power supply before opening the electrical
console.
Electrical maintenance should only be carried out by a qualified
electrician.
To avoid exposure to pressurized fluids, do not release any connectors or
perform maintenance work on parts subjected to pressure until the
pressure has been completely eliminated.
Use suitable protection when using or performing maintenance on the
unit, or when in its vicinity.
This protection includes, but is not limited to,
the use of masks, protective goggles, gloves, safety footwear and safety
clothing.
This unit includes parts which reach temperatures likely to cause burns.
Do not touch or handle the hot parts of the unit until they have cooled
down.
To avoid the risk of crushing or amputation, only use this unit when its
moving parts are fitted with correctly installed safety guards.
Make sure
all safety guards are correctly mounted after completing repair or
maintenance work.
MALFUNCTION
