HIWARM
18
All copying, even partial, of this manual is strictly forbidden
RG66007967 - Rev 02
Personal injury is prevented by not using worn or damaged, low quality or makeshift tools.
Routine maintenance specified in this manual must only be performed by authorised and trained personnel.
Contact the MANUFACTURER for maintenance or repairs that is not specified in this manual.
Stains of oil and grease and scattered tools or broken parts are hazardous as persons can slip or fall. Always keep the unit
area clean and tidy.
Do not use diesel or petroleum to clean the unit as they leave an oily layer that increases dust adhesion, and neither solvents
must be used (even if weak) as they damage the paint and increase the formation of rust.
If a jet of water penetrates the electrical equipment the contacts oxidise and the unit can malfunction.
Therefore, do not use jets of water or steam on the sensors, connectors or any electrical part.
Switch the unit off before performing any maintenance.
Serious or fatal injury could be caused if other persons
start-up the unit and activate the control buttons while
maintenance is performed.
Warning signs must be placed around the unit before
performing any maintenance in order to prevent such risks.
2.5
MAINTENANCE PRECAUTIONS
2.5.1
Tools
2.5.2
Personnel
2.5.3
Keeping the unit clean
2.5.4
Warning signs
ATTENTION
The manufacturer cannot be held liable for damage caused if modified tools are used.
DO NOT START-UP!
MAINTENANCE
IN PROGRESS
