HIWARM
CЄ
0398
Modello - Model
HWM0XXP
Matricola - Serial number
HFXXXXXXXXX
Data di produzione - Date of production
20-06-11
Categoria PED/ CE 97/23 Category
II
Procedura di valutazione conformità - Conformity module
D1
Massima pressione esercizio - Max working pressure [bar-r]
41,5
"Max pressione esercizio lato bassa pressione (carcassa compr.)
Max working pressure low pressure side (compr. shell) [bar-r]"
41,5
Max temp. di stoccaggio - Max storage temperature [°C]
42°C
Max temp. funzionamento - Max ambient working temperature [°C]
42° C
Min.temp.ambiente di funzionamento-Min ambient working temp. [°C]
-15°C
Potenza frigorifera nominale - Nominal Cooling Capacity [ kW ]
/
Potenza nominale in riscaldamento - Nominal Heating Capacity [ kW ]
/
Refrigerante - Refrigerant [Ashrae 15/1992]
R410A
Carica refrigerante - Refrigerant charge [kg]
(
1
*)(precharge)
Carica refrigerante definitva - Definitive Refrigerant charge [kg]
(
2
*)
Peso a vuoto - Empty weight [kg]
170
Taratura press. lato ALTA - HIGH pressure Switch Set [bar-r]
41,5
Taratura press. lato BASSA - LOW pressure Switch Set [bar-r]
1,5
"Taratura valvola sicurezza refrigerante
Safety valve refrigerant Set [bar-r]"
-
"Taratura valvola sicurezza acqua
Safety valve water side Set [bar-r]"
-
Alimentazione - Power supply
230/1/50Hz
Potenza assorbita Nominale - Nominal power input [kW]
5
Corrente nominale - Nominal absorbed current [A]
22
Corrente massima - Full load ampere FLA [A]
22
Corrente di spunto - Starting Current LRA [A]
0,0
Schema elettrico - Wiring diagram
HF620AXXXX
Schema frigorifero - Refrigeration diagram
HF630AXXXX
CЄ
0398
Modello - Model
HWO0XX
Matricola - Serial number
HFXXXXXXXXX
Data di produzione - Date of production
20-06-11
Peso a vuoto - Empty weight [kg]
50
Alimentazione - Power supply
230/1/50Hz
Potenza assorbita Massima - Maximum power input [kW]
0,4
Corrente massima - Full load ampere FLA [A]
1,66
Corrente di spunto - Starting Current LRA [A]
0,0
10
All copying, even partial, of this manual is strictly forbidden
RG66007967 - Rev 02
- Before performing any work on the unit, each operator must be perfectly aware of how the
unit and its controls work and must have read and understood all the technical information
in this manual.
- It is forbidden to use the unit in conditions or for purposes other than those stipulated in this manual and the
MANUFACTURER cannot be liable for faults, problems or accidents due to non-compliance with this prohibition.
- Do not repair the high pressure pipes with welding.
- It is prohibited to tamper with, alter or modify, even partially, the systems or equipment referred to in the
instructions manual, particularly the guards and symbols regarding personal safety.
- It is also prohibited to operate in any way other than that stipulated or disregard required safety operations.
- Safety guidelines together with general information provided in this manual are particularly important.
ATTENTION
Each unit is distinguished by an identification label on the
frame, which bears all the data required for installation,
maintenance and unit traceability. Take note of the model,
serial number, the definitive refrigerant charge and the
reference drawings of the unit found at the end of this
manual, in order to be easily retrieved if the data label
deteriorates and maintenance is required.
(
1
*) The indicated refrigerant charge is preloaded inside the unit before leaving
the factory.
(
2
*) The definitive refrigerant charge must be written by the technician who
installs the unit and once installation is complete.
1.5
UNIT IDENTIFICATION
MANUFACTURER DATA
MANUFACTURER DATA
