17
All copying, even partial, of this manual is strictly forbidden
RG66007967 - Rev 02
Many accidents and damage are caused due to maintenance errors, such as:
- no water in the circuit;
- incorrect percentage of refrigerant in the circuit;
- inadequate refrigerant;
- failure to keep the unit area clean;
- circuit inefficiency (pipe connections, loose pipes, screws, etc.).
Maintenance must be performed carefully even for personal safety.
Never delay repairs.
Only specialised or authorised personnel must perform repairs.
Always comply with the following safety standards, even when you are completely familiar with all the operating elements:
- Always keep the unit and its surrounding area clean.
- Before starting work check that the safety devices are in perfect working condition.
- Make sure that no unqualified or unauthorised persons enter the unit area.
- Verify that the fire extinguisher is in place.
- Periodically verify that the fire extinguishers are loaded and all operators know how to use them.
- It is important to know where the first aid kit is kept.
- Periodically verify that the first aid kit is equipped with disinfectant, bandages, medicine, etc.
- It is important to know what to do in case of fire.
- Make sure the emergency telephone numbers are readily available and nearby.
If a fire breaks out, use the fire extinguisher according to the relative regulations in force.
Contact the fire brigade.
2.4
GENERAL SAFETY STANDARDS
2.4.1
Attention and maintenance
2.4.2
Fire extinguisher and first aid
WARNING
The owner of the property where the unit is installed is responsible for providing the fire
extinguisher.
