Gallet GALMIX 232, Инструкция по эксплуатации

Страница: 24 / 40

24 / 35
– This appliance is not intended for outdoor use.
– Check if the switch
A1
is in position
0
(off) before each plugging in of the appliance and unplug the
appliance after finishing work.
– Do not switch on the appliance without ingredients in it!
– Do not mix attachments (whisks
E
and hooks
F
). If there are accessories in the propulsion unit (
E
or
F ), you can not connect blender g at the same time and vice versa.
– Do not insert the accessories in any bodily orifices.
– If the propulsion unit is operating, do not remove the accessories (e.g.
whisks, hooks, blender
),
bowl, lid and do not fold out the bracket of the stand!
– Make sure the supply cord does not get between the rotating parts of the accessories.
– Working attachments can not be replaced during operation of the propulsion unit due to safety.
– Before preparation, remove possible packages from food (e.g. paper, a PE bag , etc.).
– It is not allowed to modify the surface of the appliance in any way (e.g. using a selfadhesive
wallpaper, foils , etc.).
– Make sure that hair or loose clothes do not get into the accessories to avoid risk of them tangling
into the mixing blade.
– The maximum time of processing is 10 minutes. Then wait for 15 minutes, which is necessary for
the drive unit to cool down.
– Turn the device off and unplug from the power source by pulling the plug out of the socket before
replacing any attachments or accessible parts which are moving during operation (before installing
or uninstalling, before cleaning or maintenance).
– Do not let children use the appliance without supervision!
– Do not process ingredients with temperature higher than approx. 80 °c .
– Never insert e.g.
fingers, fork, knife, spatula, spoon
into rotating parts of the appliance and the
accessories.
– If the processed ingredients begin to stick on the accessories (e.g. whisks kneading hooks,
blender knife
), lid or container, turn the appliance off and clean the accessories carefully with
a spatula.
– Make sure the whisks do not hit the walls of the utensils during operation or do not get stuck in the
thick matter or frozen ingredients.
– Check the condition of the supply cord regularly.
– Prevent the supply cord to hang loosely over the edge of the working desk where children could reach it.
– The power cord must not be damaged with sharp or hot objects, open fire, it must not be sunk into
water or bent over sharp edges.
– If you need to use the extension cord, it has to be uncorrupted and it has to comply with the valid
standards.
– Never use the appliance for any other purpose than for that described in these instructions for use!
– The producer does not undertake any responsibility for damage caused by improper use of the
appliance and the accessories (e.g. food deterioration, injury by knife edge, fire , etc.) and its
guarantee does not cover the appliance in the case of failure to comply with the safety warning above.
II. FEATUrEs OF THE DEVIcE AND AccEssOrIEs (pic. 1)
A – propulsion unit
A1 – speed selector A4 – openings to connect accessories (E, F)
A2 – MAX button A5 – cover of the blender drive
A3 – release button A6 – supply cord
b – stand (only for type GALMIX 432)
B1 – fold-out bracket B3 – mixer fastener button
B2 – bracket fastener button
c – lid (only for type GALMIX 432)
C1 – feeding opening lid