Gallet GALMIX 232, Инструкция по эксплуатации

Страница: 25 / 40

GB
25 / 35 24
D – rotary bowl (only for type GALMIX 432)
E – whisks
F – kneading hooks
g – immersion blender (only for type GALMIX 332 and GALMIX 432)
H – spatula
(only for type GALMIX 432)
III. PrEPArATION FOr UsE
Remove all packing material and take out the hand mixer and the accessories. Remove all possible
adhesion foils, stick-on labels or paper from the appliance. Before the first use, wash the parts that
will be in contact with food in hot water with a detergent, rinse thoroughly with clean water and wipe
till dry, or let dry (see V. MAINTENANcE ). Put the hand mixer with the selected accessories on a
flat, stable, smooth and clean work surface at the height of at least 85 cm, out of reach of children
and incapacitated people (see par. I. sAFETY WArNINg ). Make sure that the power cord is not
damaged and that it does not lead through any sharp or hot surfaces. Plug power supply fork A5 to
the electric power. Choose the amount of the processed food so that the maximum volume of the
containers marked with the gauge line is not exceeded. Possible short-time mild smoke when the
appliance is operated for the first time is not a defect and the appliance is not subject to a complaint
for this reason.
Use of the individual levels (A1, A2)
0 – off
1 to 5
– speed selection (use for whisking, mixing, kneading and mixing)
MAX button – the motor is running at max. power the whole time the button A2 is pressed
– may be use at any speed level except 0.
stand (b) – for GALMIX 432
Folding out the bracket – press the b2 button and fold out the bracket b1 . To fold the bracket back
press the
b2
button again. The bracket will fold back and fasten (audible click will sound).
rotary bowl (D) – for GALMIX 432
Inserting the bowl into a stand – fold out the b1 bracket and place the bowl into the stand b so that
the protrusions on the bowl fit into the protrusions on the stand along the whole rim.Proceed reversely
when removing the container.
Inserting and removing the lid (c) – for GALMIX 432
Insert the lid in the bracket b1 so that the protrusions on the lid fit in the grooves in the bracket. Push
the lid then all the way. Proceed reversely when removing the container.
Feeding opening cover (c1) – for GALMIX 432
Sliding the cover aside, the feeding opening can be used to add liquid or solid ingredients in the bowl
D
when the propulsion unit
A
is running.
IV. UsE OF THE AccEssOrY (pic. 2, 3, 4, 5)
Consider the following tips for processing examples and inspiration whose purpose is not to provide
instructions but to show the various options of food processing. Preparation (processing) times of
ingredients range within minutes. Select the amount of processed ingredients so that the maximum
of the rotary bowl D (3 l) for liquids is not exceeded. Bigger amounts of ingredients must be divided in
several portions and the content of the utensils must be checked regularly. We recommend stopping
the working, turning off the appliance (position 0 ) and remove all ingredients which have stuck on the
accessories E, F, g or the walls of the utensils and lid (see I. sAFETY PrEcAUTIONs ). Turn off the
mixer A and unplug the fork of the supply cord A6 from the el. outlet after finishing work. Bowl D is
suitable for use in a microwave oven.