Gallagher APOLLO 3000L, Руководство по установке и пусконаладке

Страница: 38 / 48

ST
1 2 3
4 5 6
7 8 9
C 0
FILL
STOP DELIVERY
PRESET
$
L
$
L
$
L
$
L
$
L
$
L
$
L
$
L
$
L
$
L
$
L
$
L
$
L
$
L
$
L
$
L
3.2.1 Entering Service Mode
Service Mode is accessed by holding down the
F
key for three seconds. The word
FILL
is displayed in the Preset window and then disappears.
Enter the Service Mode password and press
F
again.
The screen will show
SDCARD ACTIVE
.

Note that it is not possible to enter Service Mode on more than one UI at any
given time. If a user attempts to take a second UI into Service Mode whilst
another UI is already in Service Mode, the second UI will appear not to respond.
However, when the first UI is taken out of Service Mode, the second UI will
immediately enter Service Mode.
3.2.2 Service Mode Function Screens
In Service Mode, the
2
and
8
keys initially serve as direction keys and are used to
navigate through to a particular function.
Keys
4
and
6
are also used to navigate within a function.
The figure below shows the order in which the various service mode function screens
will appear starting at SDCARD ACTIVE. When scrolling vertically or horizontally it is
possible to continue beyond the last option to the first option.
Figure 38. Service Mode Function Screens
3.2.3 SD Card Setting
The SD Card can be set to
ACTIVE
or
LOCKED
by pressing the
5
key.

Only remove an SD Card when in the LOCKED mode.
2A03229 APOLLO 3000L Installation and Commissioning Manual Issue 1
38
APOLLO 3000L COMMISSIONING