Gallagher APOLLO 3000L, Руководство по установке и пусконаладке

Страница: 35 / 48

B A
Cable Colour Terminal
Front
(A)
Brown Ventil 1 +
Blue Ventil 1 -
Rear
(B)
Brown Ventil 2 +
Blue Ventil 2 -
2.5 Electrical Installation
The electrical installation of a VR2 FDS is the same as for a non-VR2 versions except
for one additional connection which is the communications cable linking the VMS
Controller to the FDS. This cable is described in Section 1.4.
Although the following VR cables should be connected prior to despatch, this section
can be used as a reference point in the event that some cable may need re-connecting.
2.5.1 Wiring of the Proportional Valve Cables
Cables A and B have to be wired into their terminals as shown in Figure 35.
Figure 34. VR Modules Connections
Figure 35. Connections into the Bürkert Valve Controller
35
APOLLO 3000L VR2 COMPONENTS INSTALLATION
2A03229 APOLLO 3000L Installation and Commissioning Manual Issue 1