Galcon Gal Pro 4, Руководство по эксплуатации

Страница: 32 / 44

2
Gal Pro
Instruction 1.0
Sequence Info
This menu shows data from all of the sequences.
Subject Example Explanation
Sequence
Number 1 The sequence to which the parameters are related. Change the
sequence number by the Next and Prev keys.
Fertig The current status of the sequence. Identical to the parameters in
"sequence status".
Cycl.Left Today 1
Cycl.Done
Today 1
Valve 1. Active Status of all of the valves in the sequence. Info only.
The options are:
" None", "Vlv.Num", "Vlv.Def", "Active", "Finish",
"Not Fin", "Fault", "Waiting",
"Waiting", "Irrigat", "Fertil.","Cancell"
Valve 2. Active
Valve 8. Finish
Valve 0. None
Valve 0. None
Valve 0. None
Valve 0. None
Valve 0. None
Last Cyc.Time 13:45 The end time of the last irrigation of the sequence.
Last Cyc.Date 23/05 The date of the last irrigation.
Wait Time-Min. 15 The waiting time while in the queue for irrigation. Info only.
Wait Reason Free The options are:
Free - The sequence can irrigate.
Valve - The sequence is waiting for a valve that cannot currently
operate.
Sequenc - The sequence is waiting for another sequence in the
queue.
FrtProg - When there is no queue definition and another
sequence is irrigating with different fertilizer.
Prior. - The sequence is waiting for another sequence with higher
priority.
Timing - The sequence is out of the time range defined for the
irrigation.
Start Condition Off The status of the condition input.
Stop Condition On The status of the condition input.
Pause Condition Off The status of the condition input.
Oper. Condition On The status of the condition input.
7. Information and Programming Menus
Services
System Setup
Sequence Setup
Filter Flush
Fertilization
Sequence Timing
Valve • Water & Fert.
Water Counter
Diaries
Alarms
Valve Info
Sequence Info
Manual Overriding
Sequence Status Valve Status
System Status