Galcon Gal Pro 4, Руководство по эксплуатации

Страница: 24 / 44

2
Gal Pro
Instruction 1.0
Valves - Water & Fert.
Turn the selector to Valves - Water & Fert. Menu
In this menu enter the water and fertilizer amounts and the valve
constants.
Subject Example Explanation
Valve number 1 Change the valve number via the Next and Prev keys
Valve Setup Automatic Use the "+" and "-" keys to set the automat status for each
active valve.
Cancel - A cancelled valve will not irrigate even though it is
programmed in a sequence.
N. Activ -Undefined valve.
Please note !! When entering
data for the first time: First define the water counter number, the water and fertilizer
unit before programming the water required.
Water Req. 30 M3 The amount of water for the irrigation cycle.
Frt.Req. 2 L/M3 The amount of fertilizer required according to the unit set in
the Fert. Unit.
Wtr.Befor. 5 M3 The amount of water before starting the fertilization.
Wtr.After 1 M3 The amount of water after fertilization.
Water Count.No. 1 The water counter that counts the water for the valve.
Water Units M3 Via the "+" and "-" keys select one of the options: M3,
Seconds, Minutes, Hours, Liter.
6. Programming
Fertilizer
Water
Irrigation End
Water After Fertilization. Segment
Water Before
Irrigation Start
Services
System Setup
Sequence Setup
Filter Flush
Fertilization
Sequence Timing
Valve • Water & Fert.
Water Counter
Diaries
Alarms
Valve Info
Sequence Info
Manual Overriding
Sequence Status Valve Status
System Status