Galcon G.S.I DC, Инструкция по установке и эксплуатации

Страница: 35 / 42

G.S.I DC Installation and Operation Guide
34
Pausing and Resuming Irrigation from the
Controller
The controller enables you to pause irrigation. While a pause is in effect,
all irrigation programs currently in progress are paused, and any new
irrigation programs which were scheduled to start are not started.
While irrigation is paused in this way, you can still perform station
operation tests and establish communication with the server.
When the pause is ended and irrigation is resumed, all irrigation
programs continue according to the following rules:
While paused, programs are delayed until midnight. If the pause
has ended before midnight, the programs resume where they left
off.
If the system pause ended after midnight, the programs are
resumed according to that latter time instead. If an irrigation
program was scheduled to end during that time, it is not resumed
after the pause ends. Similarly, a new irrigation program scheduled
to begin during the paused period does not start and waits for its
next schedule.
To pause an irrigation program:
Press

continuously until the message “PA US” is displayed on the
screen. This indicates that the irrigation is now paused. The “PA US”
message flashes on the screen until you resume irrigation.
To resume irrigation:
Press

continuously until the Main screen is displayed.