Galcon G.S.I DC, Инструкция по установке и эксплуатации

Страница: 27 / 42

G.S.I DC Installation and Operation Guide
26

Stations always run in the order of their numbers.

You can set a different duration for each station. The cycle
time, start day, and start time apply for the first station in
the sequence. As one station’s irrigation duration ends, the
next station automatically begins.

Locally created irrigation programs continue operating even
after you upload a detailed program from the G.S.I Web
User Interface – they will both operate simultaneously. If
you want to end the locally created program, you must
cancel it in the G.S.I controller.
Setting Irrigation Program Durations
Irrigation program duration, also known as the run time, can be defined
for each station.
To set the irrigation program duration:
1. Press

until the Duration screen is displayed (Figure 33).
2. Press

to move the cursor and select the station for which you
want to define the irrigation duration.
3. Press

and

to set the irrigation duration for the selected station.
In Figure 33, the duration is set for 2 hours and 40 minutes for
station 3. Duration of 0:00 sets the station to never open its valves
(and therefore the sequence skips to the next station immediately).