Galcon G.S.I DC, Инструкция по установке и эксплуатации

Страница: 28 / 42

G.S.I DC Installation and Operation Guide
27
Figure 33: Duration Screen Example
Setting the Irrigation Cycle Time
You can set an irrigation program to occur one time only, or to occur
repeatedly according to a cycle.
When setting a recurring cycle, the cycle value you set defines the
length of time (in days) which passes between irrigations program start
times.
To set a one-time irrigation program:
1. Press

until the Cycle screen appears (Figure 34). The message
“ON CE” is displayed by default, indicating that the cycle pattern is
set to one time only.
If a cycle value other than “ON CE” was previously set for the
system, press

repeatedly until the message “ON CE” appears.
2. Press

to progress to the next screen, which automatically saves
the change.