Galcon G.S.I DC, Инструкция по установке и эксплуатации

Страница: 34 / 42

G.S.I DC Installation and Operation Guide
33
Resetting the Controller
If a technical problem occurs, you may want to reset your G.S.I
Controller.
To reset the controller:
Press the Reset button, located in the top-left corner of the G.S.I
Controller’s circuit board. The reset process clears the controller’s
RAM, and performs the flowing sequence of operations:
a. All the screen icons appear simultaneously on the screen
and gradually disappear after a few minutes.
b. The screen displays the controller’s serial number
followed by the current firmware version on the
controller.
c. The screen displays the numbers of the valves connected
to the controller. The controller starts closing the valves
one by one; as each valve is closed, its number disappears
from the screen and the CL OS message is displayed.
Optionally press

to abort this process and skip to the
next operation.
d. The controller establishes communication with the
server; the icon flashes on the screen as long as the
controller is in communication mode.
e. The controller ends communication and resumes normal
operation.
Note: Resetting the controller does not delete or cancel the
locally created irrigation program.