System Galaxy
11
QUICK GUIDE
Integrating Ademco Vista Panel
Page 5 of 22
1 ~
Introduction to System Galaxy Interface to the Vista Panel
IMPORTANT
Vista Panel cannot transmit events/alarms to System Galaxy when the alarm panel is in
programming mode
Vista Panel cannot transmit events/alarms to System Galaxy when the panel is offline (not connected)
Galaxy
Alarm Panel service
must be running to receive events. Vista Panel does not buffer events.
Overview of Features
System Galaxy (SG) integrates with the Ademco Vista Alarm Panel to provide the following:
ability to
communication to multiple alarm panels
using TCP/IP to Lantronix
serial connection
ability to communicate to a single panel using RS-232 direct connect
ability to
detect alarms
in System Galaxy from Vista Panels
ability to
arm
and disarm the alarm system
from System Galaxy
ability to
bypass points
(zones) from System Galaxy
ability to
import Point Names
from the alarm panel into System Galaxy
ability to
show device status
on the alarm points (zones)
SYSTEM DIAGRAM:
