System
Galaxy 11
QUICK GUIDE
Integrating Ademco Vista Panel
Page 11 of 22
Add Alarm Panels in SG
NOTES
Operator login must be set to allow
full editing
of Alarm Panel features.
See Operator Programming screen.
1.
To add the alarm panel, open the Alarm Panel Properties screen:
From the SG MENU: Configure > Hardware > Alarm Panels > Alarm Panels
2.
click the ADD button
3.
type a descriptive name in the Name field
4.
Select the Panel Type (Ademco Vista)
5.
Choose the Connection Method
a.
For Lantronix TCP/IP …
Enter the IP Address
Enter the port 3001
b.
For Direct Connect
Select the Com port to be used
NOTE:
the baud rate is not configurable for Vista
panel. It defaults to 1200 baud and must be set
1200 at the panel and Lantronix device.
NOTE:
the Passcode field is unused for Vista.
6.
Choose the Communication Server
Click THIS COMPUTER if you are currently
on the communication server.
NOTE:
some networks have problems resolving
a PC name. if you are in doubt, set the PC’s IP
Address in this field.
7.
Click APPLY button to save
