Galaxy Control Systems Ademco Vista, Быстрое руководство

Страница: 18 / 22

System Galaxy 11
QUICK GUIDE
Integrating Ademco Vista Panel
Page 18 of 22
Acknowledging Alarm Events
The SG Operator can right-click on any alarm event to open the command menu and issue a command.
NOTES
Some of the commands are enabled and disabled based on workstation options.
Operator filters also apply to the operator’s ability to control alarms.

See the main System Galaxy Software manual for more details on SG Operator privileges and filters.

See the Chapter 3 in this manual configuring Alarm Options in the System /Workstation Options screen.
OPERATOR COMMAND MENU:
COMMANDS DEFINITION
AFFECTED BY
OPERATOR FILTERS
Acknowledge Operator command to acknowledge an alarm event Yes
Who Acknowledged? Opens Message Box showing who acknowledged an alarm
and the response that was entered if given.
No
Delete Operator command to delete an acknowledged alarm event Yes
AFFECTED BY
WORKSTATION OPTIONS
Delete All Acknowledged Operator command to delete all acknowledged alarm events Yes – must be enabled
Silence Operator command to silence an alarm audio file Yes – the audio will replay if
the Repeat Alarm Audio
option is enabled
Acknowledge All Operator command to acknowledge all alarm events Yes – must be enabled