System
Galaxy 11
QUICK GUIDE
Integrating Ademco Vista Panel
Page 12 of 22
Add Alarm Panel Areas/Partitions in SG
Alarm Panel Areas are the same as Partitions in the Vista interface.
NOTES
Operator login must be set to allow
full editing
of Alarm Panel features.
See Operator Programming screen.
1.
To add the partitions/areas, open the Alarm Panel Area Properties screen:
From the SG MENU: Configure > Hardware > Alarm Panels > Alarm Panel Areas
2.
click the ADD NEW button
3.
type a descriptive name in the Name field
TIP:
if you want the area names to reflect which
partition number is represented, then include that
number in the name
4.
check the SHOW IN TREE checkbox
NOTE:
when checked, the partition/area will
display in the SG Hardware Tree
5.
click APPLY to save
