GALAGAR GPS 2300 PFC BI-PULSE, Техническое руководство по эксплуатации

Страница: 3 / 44

GPS 2300 PFC BI-PULSE 3
1. GENERAL DESCRIPTION. TECHNICAL FEATURES.
This equipment enable the arc-electric multiprocess welding :
Standard-arc MIG/MAG welding: Continuous, spot and interval. Manual and synergic adjustment programs.
Pulsed arc MIG/MAG welding: Continuous, spot and interval welding with synergic adjustment programs.
Bi-Pulsed MIG/MAG welding: with dual pulsed-arc feature which improve the welding bead aesthetic.
TIG DC welding with Lift-Arc striking. Pulsed TIG mode with general control of cycle parameters.
MMA welding: Rutilic, basic and stainless electrodes. MMA CEL Mode for special electrodes.
One of the main advantages of this equipment is that it has MIG/MAG processes with pulsed arc and dual pulsed arc,
enabling it to weld stainless steel and aluminium with synergic programs resulting in excellent welded seams. This makes
it possible in single-phase power networks with 16 A magneto-thermal protection. This equipment with PFC pre-inverter
stage allows high welding performance in a limited power electrical installation (3.7 KW) Its electrical efficiency level is
maximized obtaining the minimum network consumption.
The welding current is controlled by a microprocessor that enables the user to design the most suitable current form
for the welding job. For MIG/MAG and TIG procedures, this equipment is able to memorise up to 10 groups of welding
parameters (JOBS), offering more than 25 welding programs.
GPS 2300 PFC BI-PULSE Technical Features. Data according to standard EN60974-1
TECHNICAL FEATURES
GPS 2300 PFC BI-PULSE
Ref. 532.00.100
Input voltage U
1
(1ph. 50-60Hz) (1) 230 V ± 10%
Maximum input intensity I
1max
30 A
Maximum effective intensity (I
1eff
) 16 A
Maximum absorbed power P
1max
- P
1eff
6.9 KVA / 3.7 KVA
MIG/MAG adjustment margin I
2min
-I
2max
10 ÷ 200 A
Welding voltage adjustment U
2min
-U
2max
12 ÷ 30 V
MIG-MAG welding intensity I
2
ED%
200 A 40%
165 A 60%
140 A 100%
Applicable wire diameters (mm.) 0.6 ÷ 1.0 (1.2mm Al)
Wire reels Ø300 mm - 15 Kg
Wire speed (m/min.) 1 ÷ 15 m/min
Drive system 4 Rollers
– 50 W
Bi-Pulse Mode (Dual pulsed-arc) YES
Continuous MMA adjustment margin I
2min
- I
2max
30 ÷ 200 A (30%)
Continuous TIG adjustment margin I
2min
- I
2max
5 ÷ 200 A (40%)
TIG pulse frequency adjustment margin 0.1 ÷ 500 Hz
Mechanical protection index (IP) IP 23 S
Ventilation Forced
Weight 27 Kg
ACCORDING TO UNE-EN 60974. (1) Other power supply voltage values on demand.
NEVER USE THESE WELDING MACHINES TO DEFROST TUBES.
General dimensions of GPS 2300 PFC Bi-PULSE equipment
Overall equipment dimensions
GPS 2300 PFC Bi-PULSE with WCS-510
over Mobile Workstation