GALAGAR GPS 2300 PFC BI-PULSE, Техническое руководство по эксплуатации

Страница: 13 / 44

GPS 2300 PFC BI-PULSE 13
13th) Bleed gas by means of the P5 push-button, checking that the flow is between 8 and 14 l/min. Bled the wire
P5: GAS BLEEDING P6: WIRE BLEEDING
Gas bleeding. The gas
solenoid valve is activated
whilst depressed. The
solenoid valve activation is
prolonged for two seconds
after pressing.
The drive motor is
activated whilst
depressed.
14th) Switch on the cooling unit and check that coolant liquid is within the specified levels (cooled system).
15th) Select in the Control Panel within the cooling process between the options Switch-on or Automatic “REF
→
ON or
AUT” (cooled system).
3.4.3. ADJUSTMENT SYSTEM FOR MIG/MAG WELDING PROCESS.
3.4.3.1. ADJUSTMENT SYSTEM FOR STANDARD MIG/MAG WELDING PROCESS. MANUAL PROGRAM.
P1: SELECT PROCESS
P2: SELECT
WELDING
PROGRAM
E1: ADJUST WELDING
VOLTAGE
E2: ADJUST WIRE SPEED
MANUAL
Display D2:
V
Display D1:
m/ min
3.4.3.2. ADJUSTMENT SYSTEM FOR STANDARD MIG/MAG WELDING PROCESS. SYNERGIC PROCESS.
P1: SELECT PROCESS
P2: SELECT
WELDING
PROGRAM
P3: SELECT WIRE
DIAMETER
E2: SELECT WELDING
PIECE THICKNESS
E1: CORRECTING
WELDING VOLTAGE
(ARC HEIGHT) -30 % A
+ 30%
Ar CO
2
Ss
2%
1.0 mm
mm
%