GALAGAR GPS 2300 PFC BI-PULSE, Техническое руководство по эксплуатации

Страница: 29 / 44

GPS 2300 PFC BI-PULSE 29
3.7. JOB RECORDING MODE.
3.7.1. PROCESSES WITH JOB RECORDING MODE. RECORDED VARIABLES.
Program Variables of recording
MANUAL
Vh (m/min); U
2
(V); L/D; MOD; TPR; Tc; IS; TS; CCE; DWS1; DWS2; IE; TE; TPS; FDC;
TBB; DIM
Synergic
Thickness synergic line e(mm); U
2
(%); L/D; MOD; TPR; Tc; IS; TS; CCE; DWS1;
DWS2; IE; TE; TPS; FDC; TBB; DIM
MANUAL
Vh (m/min); U
2
(V); L/D; MOD; TON; TOFF; TPR; TPS; FDC; TBB; DIM
Synergic
Thickness synergic line e(mm); U
2
(%); L/D; MOD; TON; TOFF; TPR; TPS; FDC; TBB;
DIM
PULSE
Pulsed
Thickness synergic line e(mm); U
2
(%); L/D; MOD; TPR; Tc; IS; TS; CCE; DWS1;
DWS2; IE; TE; TPS; FDC; TBB; DIM
PULSE
Bi-Pulsed
Thickness synergic line e(mm); U
2
(%); L/D; MOD; TPR; Tc; IS; TS; CCE; DWS1;
DWS2; IE; TE; TPS; FDC; TBB; DIM
PULSE
Pulsed
Thickness synergic line e(mm); U
2
(%); L/D; MOD; TON; TOFF; TPR; Tc; IS; TS; CCE;
DWS1; DWS2; TE; TPS; FDC; TBB; DIM
TIG
MOD; TPR; IS; UPS; DWS; IE; TPS
PULSE
PULSED
TIG
I
2
(A); F(Hz); MOD; TPR; IS; UPS; DCL; IB; DWS; IE;TPS
3.7.2. PROGRAM RECORDING SYSTEM. JOB
P4: BURN JOB E2: SELECT JOB No. P4: SAVE JOB
2 s
JOB JOB
JOB
3.7.3. DELETING OF ALL JOB PROGRAMS BY PROCESS
P1: SELECT PROCESS TURN OFF THE
EQUIPMENT
DELETE ALL PROGRAMS
(during the switch-on process press and hold P4)
JOB
3.7.4. ENTER/EXIT SYSTEM TO JOB MODE.
P1: SELECT PROCESS
(for Job reproduction) P4: ENTER TO JOB
MODE
E2: SELECT JOB No. TO
BE REPRODUCED
D1: SELECTED
JOB
without
adjustment
activity
JOB JOB
JOB
Note: If on D1 appears the message:
JOB
this is indicative of the fact that there is no program recorded.
5 s