Gaggenau VP 230 120, Инструкция по эксплуатации

Страница: 12 / 48

12
en
Trouble shooting
Trouble shooting
Trouble shooting
m
Warning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out by one of our trained after-sales engineers.
If the appliance is faulty, unplug the mains plug or
switch off the fuse in the fuse box. Contact the after-
sales service.
Faults often have simple explanations. Please read the
information in the table before calling the after-sales
service.
--------
Disruption Possible cause Solution
The appliance is not working The plug is not plugged into the
mains Connect the appliance to the electricity supply
The fuse/circuit breaker is faulty Check in the fuse box to make sure that the fuse/
circuit breaker for the appliance is in working order
Power failure Check whether other kitchen appliances are work-
ing
The appliance will not heat up and the
illuminated ring is lit white Demo mode is activated Deactivate demo mode:
1 Turn all the control knobs to 0. Unplug the appli-
ance from the mains for 30 seconds (switch off
the household fuse or the circuit breaker in the
fuse box).
2 Plug the appliance back in. Turn any of the con-
trol knobs one position anti-clockwise within
3 minutes. All the illuminated rings will light up
white.
3 The control knob three positions clockwise.
4 Turn the control knob back to 0. Two audible sig-
nals will confirm that demo mode has been
deactivated.
The appliance switches itself off while in
use; the illuminated ring is flashing
orange and white alternately Safety switch-off function:
The controls on the appliance
have not been used for a long
time Turn the control knob to 0, then switch it back on (if
you wish to continue using the appliance)
The appliance remains off after a
power failure Turn the control knob to 0, then switch it back on (if
you wish to continue using the appliance)
The illuminated ring is flashing orange Appliance fault Turn the control knob to 0, then switch it back on
If the illuminated ring continues flashing after you
have switched the appliance back on, contact the
after-sales service