Gaggenau VG 442, Руководство по эксплуатации, техническому обслуживанию и установке

Страница: 22 / 28

Installing the Cooker Please note: If you want to convert the appliance
to a different type of gas, change the nozzles
before installing the appliance (see pages 21 - 22).
• Undo trough securing nuts and carefully detach
the trough.
Note: if a flexible gas connection is being used,
you can connect the appliance before installing it
into the worktop.
• Turn the clamping screws to the side. Insert the
hob with the Gaggenau logo on the front into the
cut-out and align it.
Note: do not stick the hob onto the worktop with
silicone.
• Turn the clamping screws under the countertop
and tighten them evenly from above. Do not
tighten the clamping screws too tightly, as a
uniform sealing gap should be left all round.
• Firmly plug the connecting cable in the control
panel (the plug must lock into place). Note: only
connect the cable with the control panel of the
corresponding type.
• Connect the appliance to the gas supply.
• Check the installation for gas leaks.
Note: when connected or reconnected to the
electricity or after a power cut a short sound may
be heard when the electronic of the gas hob
calibrates the gas valves.
20