Gaggenau VG 442, Руководство по эксплуатации, техническому обслуживанию и установке

Страница: 9 / 28

7
Switching on
• Place a suitable pot or a pan on the cooking
position.
• Press down the control knob and turn it to the
required position. The burner ignites
automatically.
• When being switched on, a short sound may be
heard when the electronic of the gas hob opens
the gas supply valve. When changing the power
level you can also hear a sound. This is a normal
condition.
Should the flame go out during operation
(e.g. because of a draught), the appliance will
automatically re-ignite the burner.
Should the re-ignition be unsuccessful (e.g. burner
is soiled by spilled over food or liquid), the gas
supply is switched off automatically after
10 seconds. Turn the control knob to the OFF
position. After the appliance has cooled down
sufficiently, check if all the burner parts have been
assembled correctly. Check if the burner, the heat
sensor or the electrode have been soiled.
Switching off
Fully turn the control knob to the OFF position.
The electronics of the appliance switch the gas
supply off.
Safety Deactivation
The appliance switches off automatically if it has
been operating for an extended period of time. The
time until switching off depends on the setting
(level 12 = 1 hour, level 1 = 4 hours).
Turn the control knob to the OFF position. Then you
can operate the appliance as usual.
4. Operation
Only light the burner if all burner parts are dry, and
assembled correctly. Otherwise, malfunctions may
occur or the appliance may switch off.