Gaggenau VG 442, Руководство по эксплуатации, техническому обслуживанию и установке

Страница: 21 / 28

19
Installing the Control Panel
• Before installation, remove all styrofoam
packaging from the control knobs and peel off
the protective film behind the luminous discs.
• Hold the support plate from the rear against the
cabinet front, insert control knobs into the hole,
secure from the rear with the nut. Take care to
install control knobs in the correct order: left for
front cooking zone, right for rear cooking zone
• Secure the control panel with the included nuts
onto the support plate.
Note:
only install control panel with appliance of the
corresponding type.
Before connecting the appliance, make sure
the electricity is switched off at fuse point!