19
Water connection
A cold-water connection is required to operate the
automatic ice maker. The water pressure must be
between 1.7 and 10 bar. The installation must be in
compliance with local plumbing regulations.
A separate stop valve must be installed in the cold
water supply. The stop valve must not be located
behind the appliance. It is advisable to install the
stop valve directly next to the appliance or in an-
other, easily accessible location (keywords serv-
ice/repair).
When installing the water connection, the permit-
ted installation areas for water pipes must be ob-
served.
The cold water connection can be fitted on the
right-hand side (a) or on the left-hand side (b).
25
59
10
a)
25
59
max. 10
b)
Top view
Top view
