1.2 Operating for the first time
Before operating the appliance for the first time,
please pay attention to the following notes:
Read through these instructions attentively before
operating your appliance for the first time.
The appliance must be installed and connected by
a specialist.
Remove the packaging from the appliance and
dispose of it properly.
Pay attention to the fact that there are accessories
in the base of the packaging.
Keep packaging elements away from children.
Before operating the appliance for the first time,
make sure that the power main connection is in
proper working order.
After first installation or a power failure, the symbol
(Door Lock) flashes in the display. Please do
not open the oven door! Then, 08:00 and the time
unit symbol flash in the display. You can set the
current time by pressing the
+
and
–
keys. When
you turn one of the control knobs or press a key, the
displayed time of day is set as the current time of
day.
Before using the oven for the first time, remove all
removable interior parts (wire rack, tray ...). Now
operate the oven for one hour at 550 °F / 300 °C in
the hot air mode. During this time, pay attention to
ensuring that the room is ventilated well, thus
removing any newness smells.
Thoroughly clean the appliance and accessories
before using them for the first time (see chapter
entitled “Cleaning and care”).
The rating plate for this appliance is visible when
you open the appliance door. An additional rating
plate is included on a separate sheet of the
instructions. For warranty reasons, store this rating
plate in the same location as your operating and
assembly instructions.
6
