18
Short time
You can program a period of time with the short
time function without automatic activation or
deactivation. You can use this mode of operation
even when the appliance is switched off as an egg
timer, for example. The range that can be set is
between ten seconds (00:10) and 23.59 hours
(23:59)
Proceed as follows:
– Press the
+
key. The short time symbol
flashes
(Fig. 24).
– The entered value appears on the display, which
you can modify by pressing the
+
or
–
key. The
time unit symbol
lights up.
– Press the
(Confirm) key to confirm the entered
value.
– The elapsing time is displayed.
Note:
Once values have been entered, if nothing is
entered for 5 seconds, the short time starts even if
the
key (Confirm) is not pressed.
Once the short time has elapsed, an audible signal
sounds and the
(Short time) symbol flashes on
the display. The signal shuts off when you press any
key. The short time reminder can be switched off at
any time by pressing the
+
and
–
minus keys at the
same time.
Elapsing timer
Proceed as follows:
– Press the
–
key (Fig. 25).
– The time, beginning at 00:00, is displayed
(maximum display: value 12 hours).
Thus, you can continuously display the elapsed
cooking time without programming automatic
deactivation.
When you press the
–
key again, the timer is
switched off.
The last programmed value is proposed to you
each time you program a short time.
Fig. 24
Fig. 25
