12
en
Getting to know your appliance
Cookware mode
The hob has various functions for the cooking position.
To access the cookware mode menu, tap the cooking
position display and then touch the
i
button.
Cooking position display
When you place an item of cookware on the cooking
surface, the indicator for the relevant cooking position
will light up on the touchscreen display.
Residual heat indicator
The hob has several residual heat indicators
f
to warn
you that one or more cooking positions is/are still hot.
One, two or all three bars of the indicator
f
will light up
depending on how strong the residual heat is. Do not
touch the cooking surface while the indicators are still
lit or immediately after they have switched off.
The residual heat indicators will remain lit for as long as
the cooking surface is still hot, even if you switch off the
hob.
Cookware mode
Function
Ð
Dynamic cooking
for an item of cookware
Allows a particular heat setting to
be selected based on the position
of the cookware by moving it from
front to back on the cooking sur-
face.
Ñ
Classic cooking for
an item of cookware
Allows the heat setting for each
item of cookware to be selected on
the control panel.
¨
Cooking sensor
You can use the cooking sensor
that is attached to the outside of the
pan to automatically keep the tem-
perature at a set level. Cooking sen-
sor mode is suitable for food that
requires large quantities of water,
oil or fat for boiling or deep-fat fry-
ing in the pan.
È
Teppanyaki
This enables the teppanyaki surface
to be divided into two sections. This
means you can fry food on one sec-
tion and keep food warm on the
other section, or use the entire area
to fry food at the same heat setting.
Cooking position detected
The cookware was detected on the cook-
ing position. The cooking position dis-
play lights up. Touch the
#
symbol to
select the cooking position.
Cooking position selected
The indicated cooking position has been
selected. You can now set the power
level.
Cooking position switched on
The indicated cooking position has been
switched on. The selected power level
lights up in the display.
There is no cookware on the cooking position
The cookware has been removed from
the cooking position. The selected
power level is dimmed.
Other indicators and symbols
The settings for the selected hotplate
cannot be configured.
For more information, touch the display.
Possible causes:
▯
Up to five items of cookware evenly
distributed over the cooking surface
can be heated at the same time.
▯
The cookware is not suitable for use
on an induction hob.
▯
The appliance has exceeded its maxi-
mum power consumption.
K
PLQ
K
PLQ
