Gaggenau CV282110, Инструкция по эксплуатации

Страница: 15 / 52

15
Operating the appliance
en
1
Operating the appliance
Operating the appliance
This chapter explains how to set a hotplate. The table
shows heat settings and cooking times for various
meals.
m
Warning – Risk of burns!
The filter cover will get very hot very quickly if left on the
hob. Never place the filter cover on the hob.Do not
place pots, pans or other hot objects on the filter cover.
Note: Switch on the ventilation system when you start
cooking and switch it off again a few minutes after you
have finished cooking. This is the most effective way of
removing steam from the kitchen.
Note: Never use the appliance without the container,
metal grease filter or filter cover.
Switching the hob on and off
Switch the hob on and off using the main switch.
To switch on: Position the twist knob on the control
panel. Touch the
#
symbol. The symbols for the
hotplates and the functions available at this time light
up.
‹
lights up next to the hotplates. The hob is ready
for use.
To switch off: Touch the
#
symbol until the display
goes out. All hotplates are switched off. The residual
heat indicator remains lit until the hotplates have cooled
down sufficiently.
Notes
– The hob will switch itself off automatically if all the
hotplates have been switched off for more than
20
seconds and the ventilation system is switched
off.
– The selected settings are stored for 5 seconds after
the hob has been switched off.
If the hob is switched back on during this time, the
heat settings that were previously set will flash. To
apply these settings, tap on the twist knob within
the next 5 seconds.
If you do not tap the twist knob or you touch a
different sensor button, all the previous settings will
be deleted.
Setting a hotplate
Set the required hotplate using the twist knob.
Heat setting 1 = lowest setting.
Heat setting 9 = highest setting.
Every heat setting has an intermediate setting. This is
shown in the hotplate display as
.5 .
Notes
– To protect the fragile parts of your appliance from
overheating and electrical overloading, the hob may
temporarily reduce the power.
– In order to prevent the appliance from producing
excess noise, the hob may temporarily reduce the
power.
Selecting a hotplate and heat setting
The hob must be switched on.
1 Select the hotplate. To do this, touch the twist knob
in the appropriate area for the required hotplate.
2 Within the next 10 seconds, turn the twist knob until
the required heat setting appears in the heat setting
display.
The heat setting is set.
Notes
– When placing an item of cookware on the flexible
cooking zone, it must be positioned correctly
according to size; see the section entitled
~
"Flex
function"
.
The cookware is detected and the hotplate is
selected automatically. You can now configure the
settings.
– If the indicators flash after you have changed the
settings, check whether the cookware is suitable for
induction cooking. See the section entitled
~
"Cookware test"
.
Changing the heat setting
Select the hotplate and change the heat setting using
the twist knob.
Z Z