Gaggenau CV 282, Инструкция по эксплуатации

Страница: 23 / 64

23
Professional cooking function
en
ˆ
Professional cooking function
Professional cooking function
You can use the professional chef function to display
the preset heat settings for each hotplate. Set down a
suitable item of cookware within 8 minutes to apply the
default value.
Activation
1 Switch on the hob.
2 Touch the
¬
symbol.
The preset power levels light up on the cooking
zone displays. The flexible cooking zones on the
left-hand side are linked.
3 Set down a suitable item of cookware within
8 minutes. Once the cookware has been detected,
the corresponding cooking zone is selected. You
can adjust the power level using the twist knob.
The power level indicators for the unoccupied
cooking zones start flashing when the adjustment
time has elapsed.
4 Touch the
¬
symbol again within 90 seconds to
extend the professional cooking function. If you do
not touch the symbol, the unused cooking zones
switch themselves off.
Notes
– Only the keep-warm function and the flex function
can be set in professional cooking mode.
– If an unsuitable item of cookware is set down (e.g.
aluminium cookware), the power level indicator
flashes until this cookware is removed. To check
whether your cookware is suitable for induction
cooking, refer to the section entitled
~
"Cookware
test"
.
Deactivating
To end the function immediately: Touch the
¬
symbol.
Switch all hotplates to heat setting
‹
. The
¬
symbol
lights up white.
Function ends automatically: If no suitable cookware
is set down after 8 minutes have elapsed, the
¬
symbol
and the corresponding hotplate displays start flashing
for 90
seconds. Touch the
¬
symbol twice to switch off
the function.
If you do not touch the
¬
symbol, the professional
cooking function switches off automatically after
90
seconds. The
¬
symbol lights up white and
unoccupied hotplates switch to heat setting
‹
.
Hotplates that are in use retain the original heat setting.
Changing the settings
You can change the default settings in the "Basic
settings" menu. See the section entitled
~
"Basic
settings"