GAC GA4, Руководство пользователя

Страница: 101 / 365

4. Operating System and Equipment
Headlight Low Beam
– Switch the Start or Ignition switch to “ON”
position.
– When the light combination switch lever is at
position
④
, turn the light switch to position
to turn on headlight low beams.
– By turning the light switch to OFF position, all
lights are turned off.
High Beam Flashing
– Switch the Start or Ignition switch to “ON”
position.
– Pull back (backward direction of the car) the
light combination switch lever to position
⑤
to
turn on headlight high beams.
– Release the light combination switch lever to
let it return to position
④
to turn off the high
beams.
Hint
Even if no light is turned on, high beams
remain on and in the instrument cluster remains
on if the light combination switch lever is pulled
back (backward direction of the car).
AUTO (Auto Lighting)*
– Switch the Start or Ignition switch to “ON”
position.
– Turn the light switch to AUTO position to
enable the auto lighting function.
Hint
• With auto lighting function enabled, lights of
the car will be turned on or off depending on
the environmental light. When the ambient
lighting outside the car dims gradually, the
position lights are turned on firstly, and then
the low beams. When the ambient lighting
outside the car brightens gradually, the low
beams are turned off firstly, and then the
position lights. When entering or exiting a
tunnel or garage or other dark environment,
the position lights and low beams will be
automatically turned on or off at the same
time.
• You can adjust auto lighting sensitivity via the
"Car Settings" under audio system => Refer to
Page 205 . The higher the sensitivity, the
brighter the lights.
95