6. Usage and Maintenance
Adding Coolant
After inspecting the coolant level, add coolant
if necessary in the following steps:
-
Wrap the expansion tank cover with a large
and thick cloth and carefully screw it out
anticlockwise.
-
Slowly add coolant to make the coolant level
reach the scope of marker line on the side of
expansion tank.
-
Install and tighten the expansion tank cover
clockwise.
Caution
●
Please firstly inspect the level before adding
coolant, and get ready according to the
inspection requirements.
●
When the engine is in warm or hot condition,
the cooling system has high pressure. At this
moment, never open the coolant expansion
tank cover. Doing so may cause scalding by
steam.
●
Each time when screwing the expansion tank
cover, use cloth to wrap the cover to avoid
scald.
●
Add new coolant only and the discharged
coolant can not be reused.
Hint
When the engine is hot, the coolant level may
exceed the MAX mark slightly.
Warning
●
The coolant must be stored in its original
container. Keep both the coolant and the
used coolant out of the reach of children.
●
Do not store the coolant in a food container
or other non-original container to avoid
confusing, resulting in poisoning.
●
Make sure the anti-freezing capability of
the coolant is sufficient in cold weather.
Add enough DF-6 coolant based on the
environment temperature. Otherwise, the
coolant may be frozen, resulting in
breakdown of the vehicle. In addition, the
driver and passengers will be exposed to
severe cold due to the disabled heating
system.
281
Содержание GA4
Страница 39: ...3 Safety Operating Instructions d Group III child safety seats For children within 22kg 36kg 33...
Страница 132: ...4 Operating System and Equipment Raise the trunk carpet you can see vehicle tools and spare tire 126...
Страница 279: ...Please refer to the description on the fuel requirement lable at the fuel filler door of each vehicle 273...
