GAC GA4, Руководство пользователя

Страница: 141 / 365

4. Operating System and Equipment
Front Windshield Defrosting
Press button to light on the button light and
enable the front windshield defrosting function. The
system will perform the following settings
automatically:
●
Increase the air speed at the air outlet.
● Turn on the A/C system.
● Enter front windshield blowing mode.
● Enter exterior circulation mode.
Press button again to light off the button
light, disable the front windshield defrosting
function, and return to the state before the
defrosting action; or press AUTO button to directly
enter the AUTO control state to disable the front
windshield defrosting function*.
Caution
When the lowest temperature is set, enabling
the defrosting function may cause fog on the
outside of the windscreen to affect the driver's
vision. When the defrosting function is enabled, the
temperature is suggested to be set at hot or warm
position.
When the defrosting function is enabled at an
ambient temperature of higher than 0
℃
, if the
compressor (A/C) is turned off manually, it may
cause fog on the front windshield to affect the
driver's vision, and even lead to traffic accidents.
Air Speed Setting
The air speed can either be controlled
manually or automatically*.
Operate the air speed control switch to control
the air speed at the air outlet manually. In manual
control mode, the air speed scale is within 1~7. The
corresponding air speed scale will be shown on the
display:
–
Pull up the air speed control switch to increase
the blower speed and the air speed at the air
outlet by one scale.
– Pull down the air speed control switch to
decrease the blower speed and the air speed
at the air outlet by one scale.
In AUTO mode, the system will control the air
speed at the air outlet automatically. The air speed
at the air outlet is not limited to 7-scale regulation in
manual state, but there are only 7-scale indicating
bar on the display, so the number of the indicating
bars shown is the proximate one. To achieve the
target value of the interior temperature, the air
speed will be adjusted automatically*.
In AUTO mode, if the air speed control switch
is operated, the system will be switched to Manual
mode from AUTO mode and the "AUTO"
identification will disappear*.
135