5. Driving Guide
5.4 Reversing Assist System
5.4.1
Reversing Radar System
Reversing radar system can assist the driver in
parking and adjusting the parking position.
Ultrasonic wave is transmitted and received by
the ultrasonic sensor installed near the rear bumper.
The distance between the car and the rear
obstacles can be measured by the system’s
transmitting and receiving the reflected ultrasonic
wave. As the car is near the rear obstacles, the
system will send alarms with different sound
according to the clearance between them: The
shorter the clearance is, the shorter and quicker the
sound will be; if the car is very close to the
obstacles, continuous alarm will be given. By this
time, if the car continues to approach the obstacles,
the system will be unable to detect them anymore.
Except alarm sound, the audio system display will
also show the dynamic icons of radar detection.
Activating and Deactivating the Reversing
Radar System
As the Start switch or the ignition switch is at
“ON” position, release the parking brake and switch
the shift lever to gear “R”; when the car speed is
lower than 10km/h, the rear ultrasonic sensor is
enabled, and disabled when the car speed is
greater than 10km/h. Release the shift lever off
gear “R”; enable the parking brake; release the
Start switch or the ignition switch off “ON” position;
then the reversing radar turns off.
Dynamic Icon *
The dynamic icons shown on the audio system
screen indicate the distance between the car and
the front and rear obstacles.
The change of such dynamic icons
synchronizes with the change of distance alarm.
247
Содержание GA4
Страница 39: ...3 Safety Operating Instructions d Group III child safety seats For children within 22kg 36kg 33...
Страница 132: ...4 Operating System and Equipment Raise the trunk carpet you can see vehicle tools and spare tire 126...
Страница 279: ...Please refer to the description on the fuel requirement lable at the fuel filler door of each vehicle 273...