GAC GA4, Руководство пользователя

Страница: 255 / 365

5. Driving Guide
Caution
●
Always keep the ultrasonic sensor surface
clean, and do not cover it.
●
It must keep the ultrasonic sensor clean and
avoid icing to make sure the bumper ultrasonic
sensor works.
●
When cleaning the ultrasonic sensor surface,
use soft wet cloth to avoid surface scratching.
Warning
• The reversing radar system does not take
the place of the driver’s observation to the
surrounding environment, so the driver
shall focus attention on reversing safely
and adjusting parking position according
to actual conditions.
● Blind zone exists when the ultrasonic
sensor is detecting the obstacles, so that
the driver must observe carefully to avoid
scraping or collision.
● During reversing in a narrow space or
uphill, the ultrasonic sensor may detect
railings, trees or slope, which is
considered normal.
● At fast reversing speed, the detection of
the ultrasonic sensor may not be as
accurate. It is suggested that the revising
speed does not exceed 10km/h. The
continuous alarm sound from the revising
radar system indicates that the car is very
close to the obstacles. The driver shall
stop revising immediately to avoid
accident.
Warning
● Clean the ultrasonic sensor with high
pressure cleaning device in a short time
and in gentle manner; keep at least 10 cm
between the nozzle and the sensor.
● Water drops on the ultrasonic sensor
surface of the rear bumper can influence
sensitivity of the sensor. To restore
sensitivity, wipe off the water drops.
● Surfaces of certain items cannot reflect the
signals from the ultrasonic sensors, so that
the sensor cannot detect such items or
persons wearing such clothes.
● The ultrasonic sensor may not detect the
objects if interfered by outdoor noise.
● The ultrasonic sensors are precision parts.
Do not dismantle or repair one by yourself.
Damage caused by such dismantling or
repairing is not covered in the warranty of
GAC MOTOR.
249