1
Governors America Corp. © 2020 Copyright All Rights Reserved
EEG6550 Enhanced Electronic Governor
5-2020-A1
PIB1118
EEG6550
Enhanced Electronic Governor
2
SPECIFICATIONS
With Quikset Display
1
INTRODUCTION
Performance
Isochronous Operation
± 0.25 %
Speed Range / Governor
100 Hz - 12 KHz
(200-6000 RPM
w/120 tooth flywheel) cont.
Idle Adjust
Up to1500 RPM
Droop Range
1 - 25 % regulation
Speed Trim
Programmable ±120 Hz
InPUT / oUTPUT
Supply
12-24 V DC Battery Systems
(6.0 to 32 V DC)
Polarity
Negative Ground (Case isolated)
Power Consumption
200 mA MAx continuous
plus actuator current
Speed Sensor Signal
1.0 - 60.0 V RMS
Actuator Current
8-10 Amps Continuous,
Momentary 12A MAx.
PWM output constant 500 Hz
Load Share/
Synchronizer Input
0-10 V DC (5 V nominal,
reversed polarity, 145 Hz / V )
Reverse Power Protection
Yes
Transient Voltage Protection
60 V
GAC’s EEG6550 Series digital governor is designed to regulate engine
speed on diesel and gasoline reciprocating engines. With flexibility, pre
-
cision, and accurate control of governed speed, the EEG is designed
for industrial engine applications from generator sets and mechanical
drives, to pumps or compressors.
The EEG6500 Series Quikset Display allows its operator to monitor and
configure parameters without needing configuration software or a PC.
◊
Improved, simple LCD User Interface
◊
Fast setup with 5 pushbuttons, no potentiometers
◊
Rated, Idle Speed, and Variable Speed
◊
Selectable Isochronous, Droop, & Variable Governing
◊
Built-In Fault Protection With Overcurrent Sensing
◊ Adjustable Starting Fuel Strategy (Black Smoke Reduction)
◊ Extended Speed Range to 12KHz or 6000 RPM with Frequency
Display
◊ Speed Ramping (Idle to Rated or any Speed Setting)
◊
Includes Standard GAC AUx Input for Synchronizing and Load
Sharing
◊
J1939 Engine Data and Speed Output
◊
Overspeed Sensing & Protection
◊ Compatible with all GAC actuators except ADB335 and ACB2001.
envIronmenTal
Ambient Temperature
-40° to 85 °C (-40 to 185 °F)
Relative Humidity
up to 90 %
All Surface Finishes
Fungus Proof and Corrosion Resistant
PHYSIcal
Dimension
See Section 3 , Installation
Weight
1.8 lbf (820 gf)
Mounting
Any position, Vertical Preferred
relIaBIlITY
Vibration
7 g, 10-2000 Hz
Shock
20 g Peak
Testing
100 % Functional Test
comPlIance / STanDarDS
Agency
CE, (EN55011, EN50081-2
and EN50082-2)
Communications
SAE J1939 (Optional)
