4
Governors America Corp. © 2020 Copyright All Rights Reserved
EEG6550 Enhanced Electronic Governor
5-2020-A1
PIB1118
One row of parameters is displayed at a time.
Row 2 Column 3
locking/Unlocking the Display
Press and hold both the UP and DOWN arrows
simultaneously for 3 seconds to UNLOCK or to
LOCK the display.
OVER SPEED will blink when the unit is in over-
speed. (Cycle power to restart)
Once the LOCK parameter on the main menu is en-
abled (ON), the display can be manually unlocked.
If the EEG detects an actuator overcurrent
it will terminate power to the actuator, the
display will flash Actuator Current along
with the warning indicator. (Cycle power to
restart)
Displays the units for the parameter (e.g. RPM)
ParameTer UnITS
Displays the value of a selected parameter or
live running parameter. This area will blink if a
system shutdown and restart is required.
ParameTer valUe
Pressing UP or DOWN arrow toggles through the
four secondary parameters: Engine Speed (RPM),
Duty Cycle (%), Actuator Current (Amps), Engine
Speed (Hz), Battery Voltage (V DC), Hour Meter
(Hrs) and Service Time (SHR)
SeconDarY ParameTerS
overcUrrenT
QUIKSeT menU
fUel lImIT
If the EEG detects that the FUEL LIMIT
setting has been exceeded, the display will
flash the FUEL LIMIT along with the warning
indicator. Parameters will be unchanged.
over SPeeD
locK
2
1
3
Tap any
For: SPEED
For: IDLE
For: FUEL LIM
Hold
To change the displayed row of parameters:
To view a parameter value in a selected row:
Hold: Button 1
Hold: Button 2
Hold: Button 3
colUmn SelecT BUTTonS
Parameter
Adjust Up
Parameter
Adjust
Down
Increment a Parameter value:
HOLD and TAP or
rapidly Increment a value:
HOLD and HOLD or
lock the Display:
HOLD and for 2 seconds
ParameTer aDjUST
enD USer InTerface
acTUaTor DUTY cYcle
100%= 11 Bars
90-99% = 10 bars
...
10-19% = 2 bars
1-95% = 1 bar
0% = 0 bars
PrImarY ParameTer valUe
(Blinks if restart required)
PrImarY ParameTer UnITS
Pressing either UP or DOWN arrow
moves the primary and secondary
parameters to the next parameter
set. The list is always traversed in
one direction.
PrImarY ParameTer (UnITS)
Engine Speed (RPM)
Duty Cycle (%)
Actuator Current (A)
Engine Speed (Hz)
Battery Voltage (V DC)
Hour Meter (Hrs)
Service Time (SHR)
SeconDarY ParameTer
Actuator Duty Cycle
Engine Speed relative to set point
Duty Cycle
enGIne SPeeD
Middle bar = set point
Top bar = Set point + 10 RPM
Bottom bar = set point - 10 RPM
SeconDarY ParameTer
5
DISPLAY & CONTROLS
