Page 17
Tag Id
Tag Event
Description
A1
Alarm1 Triggered
Alarm1 high/low condition has occurred.
B1
Alarm1 Reset
Alarm1 high/low condition is restored.
A2
Alarm2 Triggered
Alarm2 high/low condition has occurred.
B2
Alarm2 Reset
Alarm2 high/low condition is restored.
A3
Alarm3 Triggered
Alarm3 high/low condition has occurred.
B3
Alarm3 Reset
Alarm3 high/low condition is restored.
A4
Alarm4 Triggered
Alarm4 high/low condition has occurred.
B4
Alarm4 Reset
Alarm4 high/low condition is restored.
TAG
Manual Tag
User has entered a tag from device.
Note: Number of data records get reduced according to number of Tag data events.
Tag
Event(s) can be seen in software application and generated pdf report after downloading
data.
5.7.3 Ending the Measurement
➢
The measurement program is ended by one of three ways:
1.
As per the preconfigured batch stop time, the measurement will be stopped.
2.
If batch stop time is not set during the batch configuration, the measurement will
be stopped, once the maximum no. of readings has reached.
3.
By connecting the device with the LMViewE051 application, using
“
Stop
”
option.
➢
Once the measurement stops, “
REC
” message disappears from the device display
,
RUN
LED turns Off and
STP
LED starts flashing.
5.8 Reading out Data
5.8.1 Connecting with the Software Application
Displaying a measurement data report
➢
Connect the LM
Pro
T051 data logger with Windows PC via the USB Type-A port, as shown
in figure 10.
➢
After connecting the data logger with PC, display remains ON along with the other values.
Figure 10 USB Type- A connection
